We improve the thermal insulation of facades by blowing insulation into the air cavity. This minimally invasive procedure reduces heat exchange with the outside without requiring major construction work.
Request a technical visit
Aislamiento Térmico Insuflado
The facade separates the interior of a home from the outside environment and has a significant influence on its thermal performance. When the facade has an empty air cavity or insufficient insulation, heat loss can increase in winter and heat gain in summer. At Torregra, we first check the facade’s construction and whether its cavity is suitable for blown-in insulation.
We inspected the facade camera with an endoscope before recommending intervention.
We access the chamber through small perforations that are then sealed.
We select the insulation according to the chamber and the actual characteristics of the enclosure.
Based in Viladecans and travel throughout the territory.
A poorly insulated facade facilitates heat exchange between the interior and exterior. Improving the insulation of its cavity can help maintain a more stable indoor temperature, reduce the feeling of cold surfaces, and decrease heating and cooling demands.
INDICATIONS
The interior areas of the facade can feel especially cold during periods of low temperatures.
Rooms can behave differently depending on the orientation and exposure of the facade.
The heating or air conditioning runs for many hours without achieving stable comfort.
Cold surfaces can promote certain types of condensation, although other sources should always be ruled out.
Relleno de cámaras de aire existentes para reducir la transmisión térmica entre interior y exterior.
Mejora del aislamiento en zonas superiores cuando existe un espacio accesible.
Aplicable en determinadas cubiertas con cámara apta, previa revisión de su configuración.
Aplicaciones
El aislamiento térmico insuflado puede aplicarse en paredes, fachadas, falsos techos, buhardillas y determinadas cubiertas, siempre que la construcción sea apta para este sistema.
Solicita una visita técnicaINDICATIONS
The choice of material depends on the thickness and condition of the cavity, the facade configuration, and the required performance. There is no single insulation suitable for all buildings.
Solicita una visita técnica
La lana mineral es un material aislante de alta calidad, conocido por su capacidad para adaptarse a una amplia variedad de necesidades en la construcción.
Ver más
Aislante mineral con buenas prestaciones térmicas y acústicas y un comportamiento destacado frente al fuego
Ver más La celulosa actúa como una barrera térmica eficaz, reteniendo el calor en invierno y manteniendo los espacios frescos en verano. Esto ayuda a reducir los gastos de climatización.
Ver más
Material de origen natural y renovable, especialmente interesante en proyectos que priorizan soluciones de este tipo.
Aislamiento Térmico Insuflado
Como especialistas en aislamiento térmico insuflado, adaptamos cada instalación a las características del inmueble.
Analizamos el espacio, seleccionamos la solución más adecuada y cuidamos cada fase del proceso para conseguir un aislamiento eficaz con una intervención rápida y poco invasiva.
We inspected the facade chamber to check its condition, thickness, and continuity.
Definimos los puntos de acceso más adecuados desde el interior o el exterior, según el edificio.
We introduce the insulating material until it is distributed evenly throughout the chamber.
We seal the access points with putty or mortar, depending on the area of intervention.
POR QUÉ AISLAR TU VIVIENDA
Mejorar el aislamiento de tu vivienda se traduce en más confort, mayor
eficiencia y un consumo energético más ajustado.
Antes de preparar un presupuesto, comprobamos cómo está construido el cerramiento, qué condiciones presenta la cámara de aire y si el insuflado es una solución adecuada para esa vivienda.
Diagnosticar antes de aislar
A poorly insulated facade can create cold interior surfaces and promote condensation when there is sufficient ambient humidity. Improving insulation can raise the surface temperature of the building envelope and reduce these conditions, but it does not replace addressing leaks, rising damp, or other structural issues. Therefore, it is important to identify the source of the dampness before taking any action.
Solicita una visita técnica
DÓNDE TRABAJAMOS
Torregra Aplicaciones is based in Viladecans (Barcelona) and carries out blown thermal insulation work on facades in homes, communities and buildings throughout Catalonia.
Contacta con nosotros
It cannot be determined with certainty based solely on the building's age. We check the enclosure's configuration with an endoscopic camera before recommending insulation.
The intervention is minimally invasive. The insulation is introduced through small access points from the inside or outside, depending on the building, and then sealed.
The price depends on the surface area, the thickness of the chamber, the material, and accessibility. That's why we carry out a preliminary inspection before preparing the quote.
In many homes it can be done in one day, although on larger facades or entire buildings the timeframe depends on the scope and access.
There is no single option that works for all situations. Mineral wool, rock wool, cellulose, and cork have different characteristics and must be chosen according to the specific requirements of the room and the project.
Yes. Better insulation makes it harder for heat to transfer in both directions and helps maintain a more stable indoor temperature throughout the year.
Not necessarily. It can help with certain condensation issues associated with cold surfaces, but it doesn't solve leaks, rising damp, or other problems.
It depends on where the work is being carried out and whether it affects common elements of the facade. It's advisable to review each case before starting any work.
We inspected the facade chamber to check if it is suitable and to determine which solution best suits the enclosure.